Rivian R1T | Bed, cabin, and generation fitment
Best Rivian R1T Accessories: Bed, Cargo, and Fitment Guide
Compare R1T accessories for cabin protection, front trunk storage, pickup bed utility, charging, and exterior access. Shared R1 branding is not enough when generation, bed, mounting point, or console geometry changes.
Separate shared R1 fitment from R1T bed fitment
Many cabin products fit both R1T and R1S, but bed mats are R1T only. Gen 1 and Gen 2 front trunk and front fascia parts also need explicit model-year confirmation.
The reviewed listing explicitly names Rivian R1T.
The listing explicitly names both R1T and R1S for the stated years.
Gen 1, Gen 2, 4.5 ft bed, mounting point, or installed hardware matters.
Quick picks by accessory path
These are researched shopping paths, not hands-on rankings. Confirm exact fitment on the specific merchant listing.
EV Drip may earn a commission if you buy through links on this page, at no extra cost to you. Our picks are selected independently.
| Accessory path | Best for | Fitment status | Effort | Action |
|---|---|---|---|---|
| LASFIT R1T 4.5 ft bed mat | Protecting the pickup bed | R1T 2022-2026, 4.5 ft bed | Easy | Check current options |
| Spigen console organizer | Making the deep console easier to use | R1T and R1S 2022-2026 | Easy | Check current options |
| Gen 2 frunk mat | Protecting the front trunk | Gen 2 only, 2025-2026 | Easy | Check current options |
| Rivian cargo crossbars | Roof or bed cargo systems | Confirm mounting position and load limit | Moderate | Check current options |
| R1 aluminum running boards | Easier cabin access | R1T and R1S 2022-2026 | Advanced | Check current options |
| Three screen protector set | Display glare and scratch protection | Gen 1 and Gen 2, 2021-2026 | Easy | Check current options |
LASFIT R1T 4.5 ft bed mat
Protecting the pickup bed
Installation effort: Easy
Check current optionsSpigen console organizer
Making the deep console easier to use
Installation effort: Easy
Check current optionsGen 2 frunk mat
Protecting the front trunk
Installation effort: Easy
Check current optionsRivian cargo crossbars
Roof or bed cargo systems
Installation effort: Moderate
Check current optionsR1 aluminum running boards
Easier cabin access
Installation effort: Advanced
Check current optionsThree screen protector set
Display glare and scratch protection
Installation effort: Easy
Check current optionsShop by need
Start with the use case, then verify the exact vehicle and hardware in the listing.
Protect and use the pickup bed
The R1T bed is its own fitment surface. Match the 4.5 ft bed and any installed rail or cargo hardware.
Protect and organize the cabin
Screen protection, charging, and console storage can fit both R1 vehicles when the listing explicitly names the correct years.
Match front trunk gear to the generation
The reviewed cooler organizer is for 2022-2024 vehicles, while the reviewed frunk mat is for Gen 2 vehicles produced in 2025-2026.
Add exterior access carefully
Running boards and front license mounts depend on brackets, underbody clearance, and front fascia generation.
Compatibility checklist
- 1The listing explicitly names Rivian R1T and the applicable model-year range.
- 2Bed products state the 4.5 ft R1T bed and any drop-in liner exclusion.
- 3Front trunk and front fascia products state Gen 1 or Gen 2 when geometry matters.
- 4Roof and bed cargo gear matches the intended mounting point and current Rivian load limits.
- 5Installation does not obstruct cameras, sensors, recovery points, airbags, or safety labels.
- 6The seller provides a usable return policy for fitment problems.
Follow Rivian owner guidance for accessory mounting, cargo loads, roof loads, recovery points, cameras, sensors, and electrical connections.
Installation difficulty
Easy · under 15 minutes
Removable liners, mats, organizer inserts, screen protectors, phone mounts, and portable cabin accessories.
Moderate · 15–60 minutes
Mud flaps, some paint-protection kits, lighting, wheel accessories, cargo hardware, and roof-system setup.
Professional or advanced DIY
Suspension, body panels, powered wiring changes, tow hardware, or work requiring torque procedures and safety-system access.
These are category-level planning ranges, not tested times for every product. Follow the product instructions and Rivian's current owner or service documentation.
Open Rivian supportRelated EV Drip guides
Related guide
Rivian R1T Bed and Cargo Setup Guide
Work the four cargo zones in order, and skip the mis-orders.
Related guide
Rivian Gen 1 vs Gen 2 Accessory Compatibility
Which parts carry over, which are generation-locked.
Related guide
R1 Cabin Tech: Screens, Charging, and Console
The one area where R1T and R1S genuinely interchange.
Related guide
R1 Running Boards, Mud Flaps, and Plate Mounts
The three highest-verification exterior parts.
Related guide
Best Rivian R1T Bed & Cargo Accessories
Ranked cargo picks with fitment scope compared.
Related guide
Best Rivian R1 Cabin Accessories
Screen, charging, and console picks compared.
Choose your Rivian
Frequently asked questions
First-party sources
Checked July 2026. Merchant pages, availability, and wording can change.
- Rivian Gear Shop — Current factory cargo and vehicle accessory reference.
- Rivian Support — Owner guidance, vehicle documentation, and support topics.